Originally posted on Interstellar Overdrive:
I have working pretty hard on multiple projects recently, and that’s why I haven’t got the time to document my experiments with Cubieboard 2, but rest assured a good number of blog posts are coming up on that front.  However, I picked up this game from the internet called the…

http://www.eeweb.com/toolbox/calculator eCalc – Online Scientific Calculator with integrated Unit Converter

If you are planning to set up a small soldering station, refer to the following blog link for “Must haves”. http://blog.oshpark.com/2013/12/getting-started-with-soldering-tools/ Courtesy: OSHPark

Originally posted on olimex:
Eagle PCB Layout is around for many years and with their freeware 80x100mm licensee attracted lot of Open Source Enthusiasts to use it. If you check the OSHW projects which people release probably 80% of them are made with Eagle for the same reason. When Eagle was available for free, nothing…

Ideal I2C dev resources for BBxM: https://www.kernel.org/doc/Documentation/i2c/dev-interface http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/drivers/i2c/i2c-core.c Beginner resources: http://elinux.org/EBC_Exercise_12_I2C_-_xM Molly’s channel: http://www.youtube.com/watch?v=8C2zk6B-eLU I will keep updating the resources as and when I find more interesting resources

Hi, Quick small post: Whenever you face an error like: Undefined reference to `clock_gettime` while ‘make’, it would be a good idea to edit the makefile and add the following: LDADD = -lrt Define this around CXXFLAGS , LDFLAGS etc. Once defined, make sure that at the end of the file you have the following […]

Hi, As mentioned in my earlier post, I am moving towards interfacing MPU6050 with BeagleBoard. MPU6050 operates at 3v3 and BeagleBoard at 1v8. The I2C buses too use on the same voltage levels. The MPU6050 has an internal pull up resistor. For those who still do not get the issue, here it is explained in […]


Get every new post delivered to your Inbox.

Join 1,906 other followers